RCO Catalysts

Based on the experience in the catalyst research for years, Purifier has developed different types of catalytic materials towards VOC treatment. It is possible to achieve complete catalytic oxidisation of VOCs under relatively low temperature (200~400℃). The company has filed a number of national patents in VOC purification materials through its own R&D, which are applicable in a wide range of industrial sectors which generate VOCs including chemicals, pharmaceuticals, printing, coating and spraying machinery etc.

  • Product category: 1. Noble metal catalysts 2. Transition metal oxide catalysts
  • Catalyst carrier: ceramic honeycomb and metal honeycomb
  • Dimension: customised sizes and shapes (honeycomb, sphere, cylinder or other irregular shapes)
  • Air volume: ≤30000m³/h
  • Treatment concentration: ≤1%
  • Working temperature: 200-400℃
  • Treatment efficiency: ≥90%
  • Product lifetime: 1-3 years

1. Independent intellectual property rights: provide customised catalytic materials based on the type and concentration of VOCs.

2. Wide application: suitable to treat a variety of industrial emission of VOCs, including hydrocarbons and benzene derivatives etc.

3. Thorough treatment: low ignition temperature, high reaction rate, no side products of benzopyrene, dioxin or NOx etc. The compliance rate after a single treatment is significantly higher than the other methods.

4. Reliability: the process equipment is with simple design, well-developed technique, good thermal stability and safe operation.

5. Low cost: Relatively less catalyst loading, smaller device, and lower cost to treat waste gases.

The outcomes of catalyst activity test

Method:These are the conversion rates of toluene following the treatment of 480 hours under certain temperature. Concentration of toluene: 1500 mg/m3
Customer Case

中船重工吸附光催化材料供应

中船重工吸附光催化材料供应

合作方向为吸附光催化材料,主要有泡沫镍基光催化材料,吸附光催化颗粒材料等,应用于中船重工开发的系列产品中。

明和汽车部件有机废气处理

明和汽车部件有机废气处理

金属切削过程中,切削液受热产生废气挥发,有敏感性异味,我司设计废气处理方案,经过处理的尾气,通过15米高的排气筒排入大气。

康明斯喷漆废气处理

康明斯喷漆废气处理

客户的喷漆工序产生有机废气,有异味,环保部门要求必须收集和处理,我司设计建设通风系统和吸附塔,经吸附的废气可直接排出。

玛雅可涂装及印染废气处理

玛雅可涂装及印染废气处理

客户使用涂料和油墨做喷涂、印刷和烘干时,其中的稀释剂挥发出来,有异味,我司设计废气收集装置和吸附装置,污染物减量后排入大气。

法尔胜酸洗废水处理

法尔胜酸洗废水处理

客户采用盐酸对钢丝绳进行酸洗,产生含有盐酸、磷和锌的绿颜色酸性废水,我司提供车间废水处理方案,达到了废水净化和回用的要求。

西门子重金属水处理

西门子重金属水处理

江苏西门子每日3吨重金属镍废水处理项目,镍含量国家排放标准为0.4ppm,我司设计方案处理后可达到0.2ppm以下。

Contact us

Address: No.28 Tanjiadu Road, Putuo District, Shanghai.
Tel: 021-52925667    Email: info@pulifier.com